|
Post by Charlie on Dec 4, 2012 22:01:43 GMT
Got a car in today with an LED ODO which was not displaying the mileage, started the test believing I could find an RFR and complete the whole test. Luckily the ODO became clearer as the test went on and by the time I had finished I could take a reading.
That got me to thinking about the RFRs so I had a look to see if one was available for no ODO reading, looked in just about every section in training mode after test to find a relevant RFR. Needless to say could not find one, not even the 3 RFRs that are mentioned in section 6.7 for the speedometer.
So ..... my questions 1 What do I do if I cant get a mileage reading from a vehicle? 2 Has any one seen the RFRs for the speedo?
|
|
nitros44
Nominated Tester
esto es un negocio serio
Posts: 741
|
Post by nitros44 on Dec 4, 2012 22:31:47 GMT
1) Carry on with the test and when it comes to the point where you enter the milege,select the drop down list and select MILEAGE NOT DISPLAYED 2)Yes i have seen the rfr"s,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,but whats your point Charlie
|
|
|
Post by Charlie on Dec 5, 2012 7:59:29 GMT
Thanks for the answer Nitros,,,what section are the RFRs in?
|
|
nitros44
Nominated Tester
esto es un negocio serio
Posts: 741
|
Post by nitros44 on Dec 5, 2012 21:26:02 GMT
Hi Charlie, The rfr "s for speedo are not available for selection on the vts device just yet as its part of the New testable components waiting to pass legislation as per the special notice . The inspection manual on line and on the vts device contain the rfr"s but this is just to get you in the routine to check them as part of a test now,which looks like you are. Once the red tape is soughted , the speedo rfr"s will be available to select on the vts device. The rfr"s don't include the odometer ,just the speedo,just for now but that may change.
|
|