|
Post by EcoTrans (Leicester) on Aug 17, 2012 15:55:19 GMT
Tested Citroen C3 today (first test) and whilst quickly switching between dip/main beam and simultaneously working the indicators I ended up with the o/s indicator flashing whilst the n/s switch position was engaged. After several more attempts (not believing what I thought I had just seen) I managed to reproduce it. And vise-versa. Anyone else seen it?
|
|
alex
Nominated Tester
Posts: 305
|
Post by alex on Aug 17, 2012 18:32:24 GMT
Suspect faulty indicator/light switch possibly I think pug 307 suffered from a similar problem I have had this before on peugeots though.
|
|
Daveg
NT & VTS Council member
I believe I am perfect, but others may differ in opinion?
Posts: 1,549
|
Post by Daveg on Aug 17, 2012 19:18:25 GMT
It reads to me like you should slow down when operating the controls, there might not be anything wrong at all, just trying to operate too many lights all at the same time. Daveg
|
|
|
Post by EcoTrans (Leicester) on Aug 17, 2012 20:08:29 GMT
It reads to me like you should slow down when operating the controls, there might not be anything wrong at all, just trying to operate too many lights all at the same time. Daveg Well it's not an unreasonable scenario is it; driver goes from dip to main beam (or vice-versa) whilst making a change of direction. Should be made customer proof me thinks, tricky I know
|
|