|
Post by skyline on Aug 5, 2011 15:05:07 GMT
i recently have passed my practical test and now i am testing at an garage but the problem is that there is no tester to help out when i am using the computer can some one explain about the procedure of using the computer like fast tracking ,retesting , duplicates , and also about the design gross weight when it don't print out on the vt40 and any thing else and what to watch for
|
|
Daveg
NT & VTS Council member
I believe I am perfect, but others may differ in opinion?
Posts: 1,549
|
Post by Daveg on Aug 5, 2011 17:06:11 GMT
Your not asking for a lot there LOL ;D, just a quick explanation of something that has taken us years to understand ourselves ;D Best advise is for you to get hold of a copy of the VTS User Guide and read through it, the VTS should have a hard copy on file but if not email VOSA and explain your circumstances, they should be able to point you in the right direction. Dave
|
|
|
Post by flashgordon1 on Aug 5, 2011 17:45:26 GMT
Been there..........I'm still the only NT at our garage but as Daveg says there is plenty of advice out there. Dont worry about QC's etc as there is only you but the help desk is usually good and you must have other NT's elsewhere you can call if problems arise..............
|
|
|
Post by Admin on Aug 5, 2011 19:19:40 GMT
Been a while since I looked, but are the training units still on the VTS Device ?
|
|
nitros44
Nominated Tester
esto es un negocio serio
Posts: 741
|
Post by nitros44 on Aug 5, 2011 20:28:51 GMT
Been a while since I looked, but are the training units still on the VTS Device ? Ya training units are still there, insert smart card and press F5, Select training material
|
|
prb5244
Nominated Tester
Posts: 124
|
Post by prb5244 on Aug 5, 2011 21:16:02 GMT
when you use fast track in main menu and you dont have to enter brake readings you can usw fast rack by nt up to 10 working days , if you want to fast track but you want to enter brake result go to maim menu you will see register for mot top line click on that and drop down box click particail test and it will send you to next page enter the orginail test number it will print vt 40 and enter results as normal in . if you have not got old test number go other functions to duplicate and ask for duplicate put in fail and print it off you dont use test slot for fail so now you know how to do duplicate if you arw asked for a duplicate from a differant station use v5 and enter doc number and it print pass and any advisary as well. if you want to find more info on d g w have a look in testers guide introduction then test classes you will find a lot of info some classes are worked out by weight and some are by seating capacity
|
|